Diamond burnishing tool type WDB-513
Diamond burnishing tool type WDB-513
Advantages
Ordering example
Machining parameters
Advantages
Diamond burnishing tool type WDB-513
- Fast, efficient and cost-effective smoothing
- Tolerance compensation via spring force, infinitely adjustable.
- High-polished diamond for highest surface quality with roughness depths down to below Rz 1µm.
- Diamond carrier replaceable
- Ideal für Langdrehbearbeitung mittelgroßer und kleiner Serien, sowie Prototypen
- Suitable for all materials up to over 60 HRC and high-strength materials such as titanium or platinum.
Ordering example
| Tip radius | Clamping bar |
| R1; R2 | SL12; SL16; SL20; SL25 |
WDBW-513-R2-SL20
-
- WDBW 513 | Tool type
- R2 | Tip radius
- SL 20 | Clamping bar 20 x 20mm
- Optional special holders VDI, HSK, etc.
Machining parameters
VC max. Up to 160 m/min.
Feed rate up to 0.2 mm/rev.
Workpiece allowance (depending on material) from 0.015 – 0.02.
Infeed (preload) max. 2 mm.
Lubrication: Emulsion or filtered oil.
Preparation: Fine-turned or ground surface Rz 10 µm.
Description
WENAROLL WDB-513 diamond burnishing tools are specifically designed for smoothing thin-walled and hard surfaces. The spring-loaded diamond tip can be pressed onto the surface with the necessary force via the machine's infeed, which enables the machining of materials with a hardness of over 60 HRC.
